The APC1000 precisely measures the quantity of airborne particles ranging in size from 0.3, 0.5 and 1.0 to 5.0 μm at 0.1 cfm rate of flow. The APC-1000 records this data, as well as temperature and relative humidity readings. The instrument can be programmed to store data from 200 seconds to 66 days.
Features:
• Compact size and light-weight
• Simultaneous measurements of four sizes of particles
• Serial interface for printout of stored data
• Freely selectable measurement time
Applications:
• Indoor air quality assessments
• Industrial hygiene
• Clean-room diagnostics and trouble-shooting
Standard Accessories (included):
• Sampling probe
• Zero air filter
• Biotest software
• Download cable
• Charger
• Software
Specifications:
Particle Counts:
Particle size ranges : 0.3, 0.5, 1.0 and 5.0 μm
Signal-to-noise ratio : >2:1 at 0.3 micron
Flow rate : 0.1 cfm
Illumination source : 50 mW, 780 nm laser diode
Dimensions : 19.0 cm x 6.7 cm x 6.2 cm (7.6” x 2.7” x 2.5”)
Weight : 1.25 kg (2.5 lbs.)
Construction : Durable plastic enclosure
Display : LCD display
Power : 6 V sealed lead-acid battery.
Sampling mode : Single, Auto or Continuous
Sample time : Up to 8 Hrs
Memory : 200 sample points
Operating environment : 0°C to 50°C (32°F to 122°F)
Temperature sensor : 10°C to 50°C, 5% accuracy
Relative humidity : 20 to 95% RH, 10% accuracy
Talk
Canary Talk Does calibration frequency determine incident liability? The building code requires exhaust gas detectors in vehi...
READ MORE
Does your parkade CO Monitor cry like a Wolf or sing like a Canary? You are probably unaware of these small boxes in your parkad...
READ MORE
Failure to communicate high CO level has resulted in many incidents in buildings! The canary was found to be the most effective hazardous gas det...
READ MORECopyright©2019, Gasonic. All rights reserved.
