The TSI Q-TRAK is a lightweight, handheld, datalogging instrument that provides real-time measurements of IAQ parameters. The unit can be used for both spot sampling and long term unattended monitoring. The Q-Trak measures carbon dioxide, carbon monoxide, temperature and relative humidity. The TSI TRACKPRO data analysis software allows the user to download the data to a computer for further analysis and generation of detailed graphs and reports.
Contact UsSpecifications:
Range
• 0 – 5000 ppm (CO2)
• 0 -500 ppm (CO)
• -10°C to 60°C (temp)
• 5% to 95% (RH)
Accuracy
• +/-3% or ±50 ppm (CO2)
• +/-3% or ±3 ppm (CO)
• +/-0.6°C of reading (temp)
• +/- 3% (RH)
Response time : > 30 seconds
Dimensions (unit) : 9.7 cm x 21.1 cm x 5.3 cm, : (3.8” x 8.3” x 2.1”)
Dimensions (wand) : 17.8 cm x 1.9 cm (7” x 0.75”)
Weight : 360 g (0.8 lbs)
Display : LCD
Battery : 4 x AA alkaline batteries
Battery life : 12 hrs
Sample rate : 1 sec to 1 hour
Datalogging : 39 days of logging CO, CO2, temp, RH once per minute
Logging Interval : Adjustable 1 sec to 1 hr
Serial interface : RS-232 1200 baud
Standard Accessories (included):
• AC Power adapter
• USB Download Cable
• TRAKPRO data analysis software
• Spare batteries
Technical services:
• Data download
• Graphs or tabled data
Canary Talk Does calibration frequency determine incident liability? The building code requires exhaust gas detectors in vehi...
READ MOREDoes your parkade CO Monitor cry like a Wolf or sing like a Canary? You are probably unaware of these small boxes in your parkad...
READ MOREFailure to communicate high CO level has resulted in many incidents in buildings! The canary was found to be the most effective hazardous gas det...
READ MORECopyright©2019, Gasonic. All rights reserved.